Description
Which Sidewear™ is Right For You?
The following measurements are given as selection guidelines:
| 1.182″ to 1.70″ (30mm to 43mm) | Best fit for: Small Frames Medium Frames |
 |
| 1.25″ to 2.125″ (32mm to 54mm) | Best fit for: Medium Frames Large Frames |
 |
Adjustment is Simple
The following measurements are given as selection guidelines:
| Larger Frames | Open Sideshield until slightly smaller than frame size and install. |  |
| Average Frames | Ensure Sideshield is slightly smaller than frame size and install. |  |
| Smaller Frames | Close Sideshield until slightly smaller than frame size and install |  |
Mounting is Easy
Insert LEFT temple through large loop of black mounting band on the inside of the LEFT sideshield.(Fig.1)
Hold frame and sideshield firmly while stretching the band outward and back to fit into the retaining grooves and over the rear tab.(Fig. 2)
Inspect the sideshield alignment to be certain the frame is centered between the top and bottom ribs. Then, repeat these steps for the right side.
The sideshields are now affixed to the frame front and temples will fold without the sideshields moving.
The B-26+™ Plus Universal Sideshield is designed to meet all of the compliance issues of ANSI Z87.1-2010 on small to medium safety frame styles. The Glacier Clear Tint reduces objectionable distractions from glare, increasing visual comfort and productivity. It is easily adjustable for universal attachment to the broad spectrum of safety frames found in the real world workplace.
EXCLUSIVE SIDEWEAR™ FEATURES
The SAFETYWING®: provides additional vertical and horizontal coverage and prevents impact related injuries by dispersing the kinetic energy over the entire wing surface, protecting the orbiting facial area from lacerations and fractures.
The patented LIVING HINGES allow simple adjustment of either the upper or lower quadrants of the shield so as to easily adapt to any frame shape.
GE Lexan® Polycarbonate resin provides superior impact resistance, visual clarity and UV protection.
Unbiased testing – certification by a major independent laboratory to confirm compliance to the ANSI Z.87.1-2010 standard. Independent Certification assures the HSE professional of OSHA acceptance for use in the workplace.
