Description

Replacement concentrator available here: https://kleargo.com/product/vista-fata-concentrator/

INSTRUCTIONS

• Start machine with knob
• The machine will be ready for use only after 1.5 minutes
• Place the part of frame to be softened into the mouth (1)
• Process the part according to requirements
• Process the part according to requirements; the air temperature can be changed further by adjusting the regulation knob
• If necessary, in order to soften a small surface (nose pad, side arm) use heat concentrator (2)
• Mount the red extention on the hot air concentrator to further concentrate the air flow (3)

The hot air concentrator must be used only for the time that is necessary to heat the involved part.

FRAME HEATER EXTERIOR
• High quality and very resistant aluminum extrusion body never becomes hot, thanks to
the interior air flow, that “refreshes” the interspace between the aluminum body and the
motor and resistance holders’ cones.
• Modern design in every single detail, a further touch to the optical shops’ bench.
• The plastic parts are very high temperatures resistant.
• The hot air concentrator is included in each FATA pack.

FRAME HEATER INTERIOR
• The new motor holder and resistance holder are in glass fiber nylon.
• The heating element, studied and manufactured by GFC, permits to reach the 190°C
temperature (mounting the hot air concentrator) with a consumption of 350W only.
• In case of dangerous temperature, the thermostat, mounted on the heating element,
cuts the power itself.

FRAME HEATER – PLUS VERSION
• Cold air is available in Plus version when the led light is green.
• The knob rotation turns the LED firstly to orange then to red, when the frame heater reaches
the maximum temperature.
Like all the GFC equipment, this new frame heater has been studied to meet the EEC rules and it
meets the safety rules of the electric and electronic equipment.